[ ARC forum 2 ]

Re: Oh Come On What are the Devices and how are they assembled?

Written by Jim at 25 Mar 2002 17:38:43:

As an answer to: Re: Oh Come On What are the Devices and how are they assembled? written by Rood at 25 Mar 2002 15:28:25:

>Yes, I have another question. What would you suggest if the foreskin opening is 1/4 inch or slightly less?
>>I have looked at numerous messages below and no one is clear cut on how to create that device. I'm asking for clear cut advice on how to make the device using the photograph film cannister, please?
>>First, do you have the sufficient diameter in your opening to allow insertion of a film canister?
>>If that is so, then you need to cut off the end of the can with a hack saw or a crafts knife. Use a file to smooth the cut edge.
>>The end of the can which was the original opening should be inserted into the opening over the glans. Roll the foreskin up over the can and secure it to the can with medical first aid tape.
>>You can leave the can in place all day long and even pee through it. I'd suggest taking it out at bedtime to ensure that you don't cause pressure to be put upon any particular part while you might roll over onto it. Removing it daily also gives you an opportunity to inspect yourself and also take care of hygiene.
>>Any questions?

Craft stores carry an item known as friendly plastic which is easily molded into any shape. It is priced reasonably enough that several dilating devices could be made in progressively larger sizes to facilitate the stretching.


Answers: